SureCrete’s HS 200 Series is a premium exterior Silane Based clear stamped concrete sealer for durable protection on driveways and pool decks as well as high traffic walkways and sidewalks. HS 200 Series is a 20% Solids silane-based acrylic sealer that is available in a low-VOC formula. HS 200 is one of the best Penetrating Concrete Sealers on the market today.

HS 200 Series is GM GLOB MARBLE’s most advanced premium quality concrete sealer, solvent-based silane acrylic sealer. HS 200 Series is a premium exterior clear stamped concrete sealer that is designed for exterior concrete applications that need attributes such as: slower evaporating solvents, efflorescence reducers, crystal clear finish, and can protect against freeze-thaw elements. HS 200 Series is ideal for vehicular areas such as driveways, golf cart paths, and other areas where a high gloss clear durable sealer is required. It can also be used in heavy foot traffic surfaces such as walkways, sidewalks, and porticos.

HS 200 Series is available in a standard 600 g/L and a low VOC 400g/L version. When you choose this premium concrete sealer, you will notice the difference immediately. The slower evaporating solvents help to give the applicator more time to apply before it becomes tacky and begins to create “spider webs”. This is essential as temperatures are getting warmer every year. The silane used helps reduce efflorescence, by managing moisture migration. It also delivers additional protection, when the acrylic film wears down over time. HS 200 uses the highest quality acrylics to give a crystal clear, gloss finish on all exterior concrete GM GLOB MARBLE.

Specifications and Properties of HS 200

Coverage HS200LV concrete surfaces Approx 200-240 sqft per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating less than 400 g/L
Solids Content 20%
Shelf Life 2 years in original unopened container
Ready for recoat 24 hours
Light Duty Use 24 hours
Heavy Traffic Ready 72 hours
Appearance (cured) Clear Gloss
Appearance (wet) Clear
Water Resistance Excellent beads water
Mechanical Stability Excellent
Light Stability Excellent
Diluent Hydrocarbons
Odor Solvent
Application Temperature 50 – 90 degrees Fahrenheit

Test Data for HS 200™

Blush 4 hr dry / 18 hr Immersion: No Blush
Adhesion Dry Concrete: Excellent,
Wet Concrete: Excellent
QUV Accelerated Weather Testing G-53: No blistering, No yellowing @ 250 hours
Abrasion Resistance 12.5 grams loss
Block Resistance D-4969: Excellent
Heat Stability @ 120 degrees Fahrenheit
D-1849: Excellent
Film Formation @ 40 degrees Fahrenheit Passed
Water Absorption 2.4 grams per cubic meter
Pencil Hardness D-3363: HB-H
Hot Tire Pick-Up Passed (Under extreme circumstances delaminating could occur. All tire manufacturers were not tested. Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.)

Chemical Resistance for HS 200™ (Testing ASTM D-1308)

Transmission Fluid Resistant
Gasoline Remove Immediately
Formula 409 Resistant
Motor Oil Resistant
Brake Fluid Remove Immediately